About Us -
We are experts in bath enamel repair, bath And shower tray chip repairs
& BAth resurfacing and re enamelling
We Cover London, Hertfordshire and Essex
We are a family run company in London, run by two brothers.
We enjoy restoring baths and shower trays to bring them back to life looking like new again
We specialise in bath enamel repairs. We can do bath chip repairs and shower tray repairs to a great result where you can no longer see the damage.
A bath or shower tray can get chipped, cracked, scratched , dented or some enamel is peeling off slightly.
A chip in a cast iron or steel bath usually shows up with a black spot on the bath where the bath has been chipped. With our bath repair or shower tray repair technique we can repair almost any damage!
Our expert technicians have over 25 years of experience doing enamel bath repairs and shower tray repairs.
Bathtubs can get damaged with wear and tear and sometimes gets a knock from a shower head dropping, something hitting against bath, a tradesman dropping a tool, or something like that. Good news, we can do the bath repair and shower tray repair!
It’s quite annoying and an eye sore when the rest of the bath or shower tray looks good. We have a special step by step procedure for the enamel bath repairs and the shower tray repairs to really sort out the damage and make a vanishing repair.
What type of fixtures can we do enamel bath repairs on?
We can do bath enamel repairs on the following :
- Acrylic( plastic ) bath tubs and shower trays
- Cast Iron Bath Tubs and shower trays
- Steel bath tubs and shower trays
- Resin Based shower trays
- Toilet Chip Repairs
Over the last few years there are a lot more acrylic baths and shower trays so we have specialised in acrylic bath tub repairs and acrylic shower tray repairs.
There is a slightly different technique in doing acrylic bath repairs as it’s not cast iron or steel like other bath tubs. An acrylic bath chip repair or acrylic shower tray repair needs 24 hours before it can be used again. This gives the new enamel coating enough time to fully dry and cure.
We use the highest quality adhesive primer and enamel for the enamel bath repairs. This ensures that the new enamel we spray on adheres and sticks to the surface. We spend time colour matching your bath or shower tray. We make up the enamel colour on the spot using different tinters!
Believe it or not many baths and shower trays are all different shades of white so we have to find the right colour for your fixture.
What is the bath enamel repair cost?
The bath enamel repair cost on average for bath or shower chip repair is about £156-235.
The cost depends on the type of fixture it is, the type of damage that is involved in repairing it and the distance to you to factor in fuel costs.
Some repairs are harder to handle than others.
Bath Enamel Repair Full Step By Step Procedure:
- We inspect the damage of the area. We see the best way to repair the bath, shower tray etc
- We use our high quality adhesive which is put over the damage and this will make the new enamel we put on firmly stick
- We fill the crack, hole or chip with a special filler for these fixtures
- We let it dry and harden
- We then sand it and smooth it off so it’s of the same contour and blending with the surface
- We make up the enamel colour on the spot in your home to match the unit. This takes time and we have perfected the way to do this over years of experience
- We use a our own adhesive agent again over the filler to create extra strength in bonding our new enamel surface on
- We now spray on the enamel coating with a small spray gun to vanish out the repair with the matched colour we created. The spray gun is created for domestic use
- We let it to dry and cure, you can use the bath or shower tray the following day after 24 hours
Company Mission
Our goals are to repair baths, shower trays so they don’t need to be replaced.
Our goal is also to restore bath tubs to new again so they are smooth and shiny again like a new bath. White and sparkly!
The saves you time and effort in replacing a whole new bath or shower tray. It is usually a lot easier to re-enamel a bath on site right where the bath is rather than to try and remove it.
We like to see things restored to new again and like that bright smile on a clients face to see their new bath re-enamelled to new.
By repairing units it creates a greener environment for all us and less waste.
Why Choose Us
- Family run business
- Professional technicians
- Affordable prices
- No hidden costs
- Same day completion of the job
- 5 stars on Google Reviews
- Evening and weekend available
Expert Bath Enamel Repair & Re-Enamelling Services in London
Restore Your Bath to Its Original Beauty Without Replacing It
If your bathtub, shower tray, or sink in your London home has chips, cracks, or faded enamel, professional resurfacing and re-enamelling can be a cost-effective and long-lasting solution. Replacing a bath is not only expensive but also time-consuming and disruptive. With decades of experience, our team offers bath enamel repair in London and surrounding counties that restores damaged surfaces to like-new condition.
We specialise in restoring a variety of surfaces—whether cast iron, acrylic, or steel—across bathrooms throughout London, Essex, Hertfordshire, Kent, and nearby areas. From minor blemishes to large-scale surface refinishing, our meticulous approach delivers seamless results.
Why Choose Bath Enamel Repair Over Replacement?
Many homeowners mistakenly believe that a chipped or worn bathtub must be replaced. However, with our expert bath re-enamelling service in London, you can save both time and money while extending the life of your existing bath. This eco-friendly option reduces waste and offers a finish that looks and feels like a brand-new tub.
Benefits of choosing bath enamel repair in Greater London:
- Affordable alternative to full bath replacement
- Minimal disruption compared to removing and replacing old fixtures
- Quick turnaround, often completed within a few hours
- Colour-matched finishes that blend perfectly with your current suite
- Eco-conscious process, avoiding waste disposal and heavy construction
Our skilled technicians use high-grade materials and specialised equipment to produce long-lasting results. Whether you’re renovating a Victorian home in Islington or modernising a flat in Croydon, our team ensures a flawless finish tailored to your bathroom’s design and age.
What Does the Bath Repair Process Involve?
Every bath repair project we take on is handled with precision and care. Our process is designed to ensure that damaged surfaces are fully restored, both aesthetically and structurally.
Initial Inspection and Surface Preparation
Upon arriving at your London property, our team assesses the extent of the damage. Cracks, chips, holes, and worn enamel are carefully examined to determine the best approach. The area is then cleaned and degreased to remove soap scum and residue, ensuring a proper bond for the repair materials.
Surface Repair and Filling
We use durable fillers to address chips, cracks, and gouges. The materials are layered and shaped to restore the original contour of the bath or sink.
Precision Colour Matching
One of the most critical steps in the bath enamel restoration process in London is the on-site colour matching. We blend enamel to match the exact shade of your existing unit, whether it’s a crisp white or a warmer off-white finish.
Spray Application and Curing
After filling and colour matching, the enamel is sprayed evenly across the repaired area. We use advanced spraying techniques for a seamless finish. The surface then undergoes a curing process, which usually takes around 24 hours before the bath can be used again.
Types of Surfaces We Repair
Our team is equipped to work on a wide variety of bathroom fixtures across London and the surrounding counties. Whether you’re dealing with a chipped enamel bath in Camden or a scratched shower tray in Richmond, we can help.
We repair:
- Enamel bathtubs
- Acrylic bathtubs and trays
- Ceramic and porcelain sinks
- Resin shower trays
- Toilet bowls with cosmetic damage
We understand the distinct needs of different materials and tailor our repair process accordingly. Whether you’re managing a rental flat in Hackney or maintaining a period home in Chelsea, our services adapt to your space and surface.
Serving London with Precision and Professionalism
From heritage homes in Hampstead to contemporary flats in Stratford, our team brings extensive experience to bath enamel restoration across London and Greater London. We’ve worked in private residences, hotels, rental apartments, and public facilities. Our technicians are courteous, reliable, and respectful of your property.
Whether you’re preparing a property for sale, undergoing renovations, or simply tired of looking at chipped enamel, our re-enamelling services in London provide a cost-effective way to rejuvenate your bathroom.
Our work is backed by professional training, insurance, and a commitment to excellence. We follow best practices in safety, hygiene, and workmanship to deliver outcomes that meet high industry standards.
FAQs -
How long does it take to repair and re-enamel a bath in London?
Most bath enamel repairs in London take between 2 to 4 hours, with a 24-hour curing period before the bath can be used again. The duration may vary depending on the extent of damage and fixture type.
Can you repair antique or cast iron bathtubs?
Yes, we frequently restore cast iron and antique tubs in historic properties across London. We take special care to maintain their character while enhancing surface quality.
Is the repaired area visible after the work is completed?
No, our technicians use advanced colour-matching and spraying techniques to ensure the repair blends seamlessly with the surrounding enamel. The finish is typically indistinguishable from the original surface.
Are your services safe for households with children or pets?
Absolutely. We use non-toxic, industry-approved materials. However, we advise keeping children and pets away from the work area during the repair and curing process.
Will the repaired surface feel different from the original?
No. Our technique produces a smooth, uniform finish that feels like the original enamel surface.
How long will a re-enamelled surface last?
When properly maintained, our re-enamelled bathtubs in London can last for 10–15 years. Avoid using abrasive cleaners or dropping heavy objects onto the surface to extend its lifespan.
Can you repair shower trays or sinks in rental flats?
Yes, we regularly work with landlords and property managers across London to restore bathroom fixtures in rental accommodations. Our process is quick and minimally disruptive
What happens if the damage returns after the repair?
Our work is supported by warranty terms. Should the repair degrade prematurely under normal use, we offer follow-up services to inspect and resolve the issue.
Your Trusted Partner for Bath Restoration in London
When your bathtub or shower tray is damaged, don’t rush to replace it—consider a professional restoration instead. Our expert services in bath enamel repair across London deliver excellent results at a fraction of the cost of replacement. Whether you’re dealing with cosmetic chips or large-scale surface deterioration, we bring industry knowledge, experience, and local understanding to every job.
By choosing re-enamelling over replacement, you invest in sustainability, affordability, and long-term bathroom aesthetics. Our detailed repair methods, careful material handling, and eye for precision ensure that your bath, shower tray, or sink looks and functions beautifully for years to come.
Contact us today to discuss your repair needs, schedule an assessment, or request a quote. Let’s bring your bathroom back to life—quickly, affordably, and professionally.